- Product Description
Our most advance sauna heater for home use feature advanced OCSB external electronic controller. A sleek remote keypad allows user to control sauna heater duration 12 hours in advance, control precise sauna temperature, activate lighting inside cabin, check diagnostics. A separate control box houses the heavy duty electrical components which switch the sauna heater elements sequentially during operation to maintain an accurate temperature inside the cabin. Also included is a temperature sensor to be located inside the cabin which also provides overheat protection. The low voltage connection between the control box and the keypad allows the user controls to be located in another room to the sauna.
Not only are digital controls are more accurate and more reliable than conventional controls they are particularly suitable for commercial use - allowing the operator to maintain control over the sauna temperature and prevent tampering. A series of LEDs show each function of the heater and allow for quick and simple fault diagnosis in the event of a problem occurring.
Manufactured to a robust design the grey outer case has has attractive appearance and increased durability, the incalloy heating elements are made with stainless steel sheathing for extra long life. A heat deflector is provided around the rock box to protect the cabin walls and all models are supplied with peridotite rocks, mounting brackets, fixing screws and instructions.
Dimensions (LxWxH) 410 x 280 x 570 Controller External Digital Remote Controls Cubic Metres 9-12 Electrical Supply 230/400 Volt 1/3 Phase Total KW 9Kw Heater Type Wall hung Hard Wiring Required Yes Specifications 9Kw Controller OCSB Heavy Duty Cubic Meters 9-12CBM Dimensions L 410 X W 280 X H 570mm Electrical Supply 230 or 400Volts Number of Elements 3 Temperature Sensor Operates 0-110°C
- Which heater to choose
Built in Digital Control Heater
Oceanic wall hung heater for domestic use with digital controls for time and temperature are incorporated into the base of the unit. 1.5 hour timer with automatic high temperature safety cut off. Suitable to single of three phase connection (4.5 - 6kw units)
- Only requires one cable to the heater from isolated mains supply
- No additional keypad required
- All in one cost effective option
OCSB Digital External Control Heater
For the most reliable, accurate and quickest heating of your sauna our simple to use OCSB control system is the best solution. Control the time, temperature, lighting and fan from the easy to use keypad that can be mounted up to 10m from the main control box, typically on the front of the cabin. Heavy duty relays sequentially switch the elements to ensure accurate and efficient control of the internal sauna temperature which is measured by a wall mounted temperature sensor.
- Remote keypad makes it easier to activate and control the heater
- Heavy duty relays and sequential switching for prolonged life of heater
- Higher temperatures can be reached with the internal temperature sensor
- Faster heat up time
- Lighting and fan can be switched via the keypad
- 12 hour timer
- Electrical Information
- Sauna heaters do not operate from a 3 pin plug, they require hard wiring via an isolator switch using high temperature silicon rubber cable to BSEN 6141 (not included). Purchase 3 Meters as an optional extra or See our sauna accessories page for Silicone Rubber Cable in order to order different lengths.
- For heaters with Built in Controls the lights must also be wired separately with silicon bound heat proof cable. Silicon bound cable is available to purchase from our Sauna Accessories page.
- For heaters with Remote OCSB controls, the control box will supply the heater, keypad, lights and temperature sensor. The control box is usually positioned on the roof of the cabin
- A suitable power supply - isolated 230V single phase supply to the correct standard installed by a qualified electrician.
The cost to run an average 4.5kw sauna heater is 54p per hour. (using an average unit cost of 12p per kWh, please check with your service provider for exact unit costs.)
- Delivery & Warranty
Delivery to Mainland England or Wales £18 for other areas please use our delivery calculator at the checkout or call our sales team for a quotation. Orders placed before 4pm will be despatched the next working day.
Service: Express 24
You will receive an email confirmation from Parcelforce to confirm your order is due to be collected. If a mobile telephone number is provided when you place your order you will receive text notifications regarding the status of your delivery.
Please note: In most cases orders are delivered on the next working day but on occasion may take up to 3 working days.
For full details please refer to our Shipping Policy
All Oceanic sauna heaters have a 12 month warranty.
The warranty excludes heating elements as these are consumable items.
Our after sales service is at your disposal Monday - Thursday 9am - 5pm, & Friday 9am - 3pm, all parts are in stock and will be available during and beyond the warrant period.
- Download Files & Manuals