- Product Description
-
Over 15 years of development has gone into our range of Turkish Steam Rooms. Our aim has been to offer the highest quality finish at the best value for money.
All rooms are available with a range of mosaic tiles from various ranges. Aside from our range of steam room doors we now offer 10mm frameless full glass front throughout the range.
We supply our Oceanic steam generator manufactured to meet the requirements of either domestic or commercial use. The correct size and type of generator is supplied along with chrome inlet nozzle, glass steam guard, digital controls etc.
An in built wet room floor with associated drainage is optional. Lighting and ventilation are supplied with all steam rooms. There are a host of optional extras available such as fibre optic lighting and bluetooth speakers.Our Turkish Steam Rooms have been designed to make the construction as straight forward as possible whilst also allowing for modification of size on site if necessary. The room is delivered as a kit of parts with details installation instructions and everything you need to construct the room except a few lengths of wire and pipe that is available from any hardware store.
- Specification
-
Dimensions (LxWxH) 1966 x 1346 x 2400mm Controller OCA digital controller Electrical Supply 400V Via Isolator Switch - Product Features
-
Curved Benches
All Oceanic Turkish Steam rooms are supplied with ergonmic benches suitable for sitting comfortably with raked backrest and smooth curved edges. The standard bench has a quarter round at the top of the bench. If under bench lighting is requeired as an optional extra the half round version of the bench can be requested.
Curved Ceiling
Evoking the traditional aesthetic of a Turkish Steam room our elegant curved ceilngs also prevents dripping condensation. Models 1, 2 and 3 have a ceiling that curves down the rear wall wheras models 4, 5 and 6 have ceilings that curve left and right in an arch shape. Variations with glazed front or side panels will often have flat ceiilngs as the curves are not possible in these designs.
Full Glass Door
A fully glazed door with toughened 8mm glass, chrome handle and hinges with a chrome frame is included with all steam rooms. The standard size is 785 x 1850mm, alternative sizes are available, please see the Steam Room Door page of the website for the full range.
All seals are provided. The threshold at the bottom of the frame can be removed if required. There is 40mm of adjustment in the width of the frame. See the Steam Room Door Manual in the downloads section for more details on installation.
Lighting
We supply IP65 low voltage spot lights which illuminate the room which softens and becomes a relaxing glow as the room fills with steam. You can choose to have fibre optic lighting as an optional extra, therefore you could have the fibre optic lighting on when using the steam room, and use the spotlights when you clean, or can have them both lights switched on together for a brighter feel to your steam bath experience.
Ventilation
Ventilation is created naturally via an inlet air gap beneath the door and a passive adustable exhaust vent positioned near the top of the steam room.
- Generator Technical Information
-
Home Steam rooms are provided with the right size Steam Generator with chrome nozzle and glass guard.
- The steam generator requires a 15mm cold water supply, a 40mm drain, an isolated power supply
- Needs to be installed within 10metres of the steam room
- Needs good access for future maintenance
- Sequential heating - quickly heats up and maintains temperature
- Advanced digital controls - keys to set time, temperature, lighting and draining
- Smart inlet nozzle with facility for an aroma pump - please ask for more details
- Installation & Size Adjustments
-
With our simplified, detailed, step by step 3D instructions all of the steam rooms are suitable for installation by a local builder eliminating the need for specialist installers having to travel long distances and their overnight accommodation costs.
The room is made up of four stud walls, a ceilng and the optional built in wet room floor. The benches and curved ceiling elements fit within this self supporting structure which is then lined in a vapour proof material which is taped and tanked before tiling. All grout, adhesive and required materials are supplied for tiling along with the fittings and fixtures for the entire steam room.
Before installing the room the following services and supplies should be considered:
- An Isoltated Mains supply for the generator (230 single phase or 400V three phase can be used on most of our generators. Please check specification sheet for full details.
- 1 Bar max cold water supply via a 15mm copper pipe to connect to the steam generator.
- Drain connection for the generator 15 or 22mm depending on generator size
- 1.5 inch drain connection at ground level if built in floor option selected.
- If opting without built in floor a wetroom floor should be installed with falls towards a centrally located drain.
- 4 inch passive vent duct supplied with the room to be connected to outside wall / area that can handle steam.
- A lighting circuit can be connected to the steam generator and controlled via keypad.
- If selecting speakers a power supply should be supplied for the speakers.
- If selecting concealed shower kit, hot and cold water feed required to connect to the thermostatic mixer.
Size Adjustments
The size of the room can be adjusted /(reduced) on site by following the instruction manual supplied with steam room. If you prefer to have the reduction done in the factory we charge a fee depending on the number of dimensions that need modifying. Contact the sales team for further information.
An image of the minimum overall reduction is shown below. The minimum height with built in floor is 2118mm. Without floor minimum height is:1980mm
- Delivery & Warranty
-
Delivery
Delivery to Mainland England or Wales £150 for other areas please use our delivery calculator at the checkout or call our sales team for a quotation.
Turkish Steam Rooms are delivered on a palletised shipping service to the curbside of your property using a moffett vehicle. We recommend two - three people are available to offload the pallet which usually takes around 30 minutes. Gloves and safety goggle are recommended especially when handling glass. For more information on deliveries please call our sales team.
Once your steam room has been manufactured (usually 2-3 weeks) it will be palletised and despatched, you will receive a call from the carrier 2 days in advance of delivery to arrange a suitable delivery date.
If nobody is available to receive the delivery and it has to be redelivered you will be liable for this cost.
If your steam room is not immediately required please let us know as soon as possible, all steam rooms are made to order.
For full details please refer to our Shipping Policy.
Warranty
All Oceanic steam rooms have a 12 month warranty.
The warranty excludes generator elements as these are consumable items.
Our after sales service is at your disposal Monday - Thursday 9am - 5pm, & Friday 9am - 3pm, all parts are in stock and will be available during and beyond the warranty period. - Download Files & Manuals
-
Product Attachments
Generic Steam Room Schematic Size: (92.33 KB)Guide to Building a Steam Room Size: (37.55 KB)Steam Generator Domestic/Light Commercial Manual Size: (2.17 MB)
