- Product Description
The Oceanic 12Kw behind bench sauna heater is extra robust and has been built for long day heavy duty operation, it is suitable for use in sauna cabins 14-18 cubic meters in size, to calculate the size of your cabin in cubic meters multiply the 'height x width x length'. Although these sauna heaters are popular for professional use, many domestic customers install them due to their safety aspects.
All behind bench sauna heaters are supplied complete with OCSB Digital remote controls, a water dosing bowl, and 15kg of sauna heater rocks.
Oceanic behind bench sauna heaters have a number of major benefits:
- Safer bather environment because the heater is hidden behind a false wall preventing accidential injuries.
- Prevents tampering
- Controlled water dosing
- Protected and longer lasting sauna heater elements
- Energy saving sequential Heating
- OCSB Digital Remote Control with
- Provides more space within the cabin
There are many advantages of this model of heater, for full details of these please see the features tab below.
We also recommend using a heat proof board around and above the sauna heater to protect the timber, this can also be purchased from us in 1200 x 1200mm boards.
Dimensions (LxWxH) 1300 x 225 x 850mm Controller OCSB Digital Controlls Cubic Metres 14-18 Electrical Supply 400 Volt 3 Phase Number of Elements 9 Temperature Sensor Operates 0 - 110°C Specifications 12kw Controller OC-SAIII Cubic Meters 14-18CBM Dimensions L 1300 X W 225 X H 850mm Electrical Supply 400Volts Number of Elements 9 Temperature Sensor Operates 0-110°C
- Which heater to choose
Floor Standing Heater
Oceanic Floor Standing heater with OCS-B controls is available in 3 sizes: 9kw, 12kw and 15kw, low votage control panel and high voltage control box. Must be wired three phase.
- Built for heavy duty use
- Stainless Steel shell
- Large 25kg rock basket
- Long life incaloy elements
- Simple to replace elements
- On view inside the sauna
Behind Bench Heater
The Oceanic behind bench heater with OCS-B controls is a wall mounted unit that is located behind a false wall at the rear of the cabin. There are many advantages of this model of heater
- Built for heavy duty use
- Protected heating elements
- Rocks do not come into contact with heating elements
- Drip and eveporation trays control the water dosing. This prevents water being splashed directly onto the elements which is a common cause of element failure in standard sauna heaters.
- A water dish and hose are fitted with the behind bench heater, users pour water into this dish mounted behind the false wall and the water is distributed evenly across the rocks.
- Safer to use - prevents any accidental injuries from users being able to come into contact with the hot surfaces of the heater
- More energy efficient
- Product Features
Safer Sauna Heater
Positioning the sauna heater behind a false wall in the sauna cabin increases the safety of the sauna bathers, ensuring against accidental slips, trips or falls onto the sauna heater. The air temperature of the sauna cabin is often between 80 - 100 °C, however the hot surfaces of sauna heater and the rocks covering the elements can be in excess of 400°C.
Additionally a grate is positioned between the false wall and the rear wall of the sauna cabin to stop any debris (towels etc...) from being dropped onto the sauna heater.
Protected heating elements
The sauna heater elements are located beneath the rock tray in the behind bench sauna heater. This prevents water being splashed directly onto the elements which is a common cause of element failure in standard sauna heaters.
A water dish and hose are fitted with the behind bench sauna heater, users pour water into this dish mounted behind the false wall and the water is distributed evenly across the rocks. Water thrown behind the bench will also be collected by the rock tray and will never fall directly onto the elements.
Oceanic sauna heaters have been designed to provide greater control over the sauna cabin environment.
Sequential heating - to begin with all of the elements switch on for rapid heating, as the required temperature is approached the elements switch off sequentially until just one element is left on in order to maintain the cabin temperature steady within a narrow band - helping to improve user comfort and extend the life of the elements, as well as reducing energy waste.
OCSB Digital Remote Controls
OCSB digital remote controls for time, temperature and overheat protection, there is also a switch for the sauna cabin light and the starting time can be preset up to 12 hours in advance. Not only are digital controls are more accurate and more reliable than conventional controls they are particularly suitable for commercial use - allowing the operator to maintain control over the sauna temperature and prevent tampering. A series of LEDs show each function of the heater and allow for quick and simple fault diagnosis in the event of a problem occurring.
- Installation & Size Adjustments
- Sauna heaters do not operate from a 3 pin plug, they require hard wiring via an isolator switch using high temperature silicon rubber cable to BSEN 6141 (not included). Purchase 3 Meters as an optional extra or See our sauna accessories page for Silicone Rubber Cable in order to order different lengths.
- For sauna heaters with Remote OCSB controls, the control box will supply the heater, keypad, lights and temperature sensor. The control box is usually positioned on the roof of the sauna but can also be positioned in a plant room for commercial establishments.
The cost to run an average heavy duty commercial sauna cabin with a 9kw heater is £1 per hour until the sauna cabin has reached temperature (which is around 20 minutes), after which the heater will maintain the temperature in the sauna using sequential heating reducing the running cost considerably. (using an average unit cost of 12p per kWh, please check with your service provider for exact unit costs.)
- Optional Extras
Heat Proof Board
We recommend that heatproof board is used around and above the sauna heater to protect the timber from scorching, this will prolong the life of your sauna cabin as well as ensuring it looks its best over the years.
120°C High Temperature Waterproof IP65 Speakers With Bluetooth
Two water proof IP65 rated 120°C 10 cm (4") speakers with plastic basket and grill. Balanced, high cone frequency response efficiency and good high to mid-range reproduction. Suitable for use in swimming pools, saunas, steam rooms. Bluetooth mini stereo audio for connecting to Bluetooth enabled devices.
Sauna Accessory Kit
A complete sauna accessory kit comprising a lamp and shade, a bucket and ladle, a sand timer, and a thermometer.
- Delivery & Warranty
Delivery to Mainland England or Wales £40, for other areas please use our delivery calculator at the checkout or call our sales team for a quotation.
Carrier: Panic Transport
Service: 7-10 working days
Behind bench sauna heaters are delivered on a palletised shipping service to the kerbside of your property. Delivery is within 7-10 working days, you will receive a call from the carrier 2 days in advance of delivery to arrange a suitable delivery date.
For full details please refer to our shipping policy.
All Oceanic sauna heaters have a 12 month warranty.
The warranty excludes heating elements as these are consumable items.
Our after sales service is at your disposal Monday - Thursday 9am - 5pm, & Friday 9am - 3pm, all parts are in stock and will be available during and beyond the warrant period. We recommend busy establishments hold a critical spare parts kit so down time can be avoided where possible.
- Download Files & Manuals