- Product Description
All Oceanic Infrared Saunas are manufactured in our own UK factory using traditional kiln dried Grade A Unsorted Scandinavian spruce from managed and replanted forests. All models are designed for permanent installation with fully screwed joints.
Our domestic models are available in 3 levels of specification including our unique “Infrared Saunarium” combined sauna and steam.
The Oceanic IR2525L 1650 x 1650 x H1950mm (2400Watts) infrared sauna is supplied complete with 8 x 300 watt Oceanic infrared heaters with digital controls having a countdown timer for settings up to 60 minutes, a thermostatic temperature control to set upto 60°C and a high temperature safety cut off at 80°C to prevent overheating. Stereo Speakers with audio connection lead to connect to compatible MP3 or smart phone devices, our brand new modern full height safety glass sauna door with clear glass, polished chrome & Ash wood handle and polished chrome hinges. Slatted wooden benches, backrest and floor mat, lighting, all fittings and fixing, assembly manuals and user instructions.
All infrared sauna panels are fully insulated with rockwool fibre, and are clad on both the exterior and interior faces allowing the sauna to be assembled free standing in almost any location without the need for brickwork, plastering or fixing to walls .
The door mounted in its frame is the same size as a panel and entirely symmetrical allowing its position on the to be readily interchanged, though the door must for safety reasons be opened outward it can be hinged either left or right.
Infrared Saunarium: no plumbing - no drainage
The Infrared Saunarium system has been designed with simplicity in mind no plumbing or drainage is required – the generator is topped up with water from a jug or a kettle. Just a small amount of water produces a considerable amount of steam – during a 10 to 15 minute session only a cup full is boiled away – and thanks to the special coating and extra ventilation at the end of the steaming session any small amount of condensate left inside the cabin can easily be sponged away, then the door and vents left open for it to dry. All infrared saunarium panels are clad on both sides with spruce cladding, are coated on interior faces with Saunarium water barrier treatment, and are fully insulated with rock wool fibre to reduce heat loss, increase efficiency, reduce warm up time and improve user comfort.
Please note the Infrared Saunarium system is only available on specified models.
- Celebration or Deluxe
Our Celebration saunas are our most popular and cost effective specification, they feature kiln dried Finnish Spruce timber for the benches, backrests, floor mat and heater guard, the lighting provided is low voltage spot lights.
For those seeking extra style and comfort, our Deluxe specification offers an upgrade to Abachi timber for the benches, backrests, floor mat and heater guard. Abachi timber is knot free hardwood with an attractive appearance, it is selected for use in saunas due to its low thermal conductivity. The lighting provided is low voltage spot lights and colour changing chromotheraphy lights.
Dimensions (LxWxH) 1650 x 1650 x 1950mm Total KW 2.4kw Model IR2525L Flat Packed Yes Materials the Sauna can be erected on Vinyl, Ceramic, Concrete Bench Width 430mm Number of Low Benches 2 Number of Bathers 4 Air Gap Requirements 25mm Plugs into 13A socket Yes
- Technical Information
New Generation Infrared Heaters
All of our heaters are equipped with new generation incandescent Infrared heat lamps with quartz elements and carbon fibre filaments. These have an increased spectral distribution of light that includes part of the visible spectrum to more closely resemble the effect of natural sunlight, these are designed for instantaneous heating.
- Product Features
Oceanic Infrared Heaters
Oceanic infrared sauna heaters are full spectrum covering IRA, IRB and IRC wave lengths, all of our heaters are equipped with new generation incandescent Infrared heat lamps which have an IR output that resembles the effect of natural sunlight. Designed for instantaneous heating, as soon as they are switched on the infrared elements begin to glow red and start emitting heat across the full infrared spectrum giving instant direct warmth.
Timber selection is crucial to the correct performance of the sauna cabin. Spruce, which has both low heat absorption and low resin content is ideal. Although it grows in many regions, in the northern areas of Scandinavia the countless generations of experience of nurturing trees, pruning and thinning combine with the cooler weather conditions which slows growth ensuring straight strong timbers.
Specifying top grades means we take only material which is free from dead knots, splits and shakes, the timber is kiln dried in the country of origin, it is then checked again for quality before being assembled into a sauna cabin.
SAFETY GLASS DOOR
A full height clear glass door constructed from tempered safety glass, featuring modern polished chrome hinges and matching Ash and polished chrome handle
FULLY INSULATED PANELS
All wall and ceiling panels are fully insulated with DIN4102 rated Earthwool fibre insulation, ensuring the heat is contained within the cabin, speeding up heat up times and reducing energy waste.
Two speakers with AUX functionality allowing you to connect to the speakers with devices such as most mobile phones.
Deluxe infrared saunas are supplied with colour changing LED down lights, seamless colour transition between all colours in the spectrum. Remote control included with variable brightness and ability to change between colours.
It is possible to find a number of manufacturers of Infrared saunas and sauna heater elements that are marketing their products as ‘Low EMF’.
EMF is an acronym for Electric and Magnetic Fields. There are three types of field associated with EMF: Electronic, Magnetic and Radio waves. A common measurements for magnetic fields is milligaus (mG).
There is currently no definitive medical proof for the effect of EMFs on the human body. Most of the sources for information relating to human health and EMF are attempting to sell products to either measure or reduce EMF and do not provide proven side effects of exposure.
There are no statutory exposure limits in the UK.
For the sake of transparency we have tested our Infrared emitters to offer a comparison to anyone considering purchasing an infrared sauna. The reading at the backrest is 1.6 milligaus To provide some context we also show the level of other household devices. Your mobile phone typically produces around 5 milligaus and if you are reading this on a computer screen you could easily be being exposed to over 30 milligaus.
If you are seriously concerned about the effects of EMF we recommend you contact your GP for reliable medical advice.
- Installation & Size Adjustments
Important Notice: It is not possible to install our Infrared Sauna Cabins with a height lower than 2200mm, if you have a height which is lower than this we can provide a bespoke wiring kit at an additional cost, for more information please inquire.
1) The Infrared sauna cabin is for indoor use only.
2) All measurements are external measurements and are + or - 10mm. Please allow for a minimum 25mm air gap all around all cabins.
3) Saunas do not come with flooring, Sauna is supplied with pre-cut timber to create a floor to cover the area in front of the benches and underneath the heater which is then placed on top of your existing flooring. Saunas can be erected onto an existing floor that can be vinyl,ceramic,concrete but not carpet.
4) All Infrared cabins require a 13amp socket but must not run off an extension lead.
- Optional Extras
(Model 2020 and larger only)
Combination sauna and steam option.Unique new range combines an infra-red sauna with a steam bath for the increased pleasure and relaxation, the ability to add crushed herbs or essential oils to the steam will add yet another dimension to the experience.
Infrared saunas are normally dry saunas, but many users enjoy the sensuality of steam and increased humidity of the more traditional sauna. Now thanks to the introduction of a small steam generator into the cabin our range of Saunariums provide this facility
The Oceanic mini steamer which has been designed for use with our hermetically sealed infra red emitters, it is wall mounted has 3 heat settings and is equipped with boil dry protection, indicator lights to show the water levels and power settings. A splash guard also provides a space to place crushed herbs or drops of essential oils so as to infuse the steam with their fragrance and elevate the experience to another level.
NO PLUMBING - NO DRAINAGE
The Saunarium system has been designed with simplicity in mind no plumbing or drainage is required – the generator is topped up with water from a jug or a kettle. Just a small amount of water produces a considerable amount of steam – during a 10 to 15 minute session only a cup full is boiled away – and thanks to the special coating and extra ventilation at the end of the steaming session any small amount of condensate left inside the cabin can easily be sponged away, then the door and vents left open for it to dry.
All panels are clad on both sides with spruce cladding. All panels coated on interior faces with Saunarium coat water barrier treatment. All panels are fully insulated with rock wool fibre to reduce heat loss, increase efficiency, reduce warm up time and improve user comfort.
Celebration Model shown, for individual specifications please see descriptions.
Listening to your favourite relaxing music whilst enjoying your steam room couldn't be easier with our bluetooth amplifier to connect to your speakers. Compatible with all bluetooth enabled devices.
- Delivery & Warranty
Curbside delivery to Mainland England or Wales £59 for other areas please use our delivery calculator at the checkout or call our sales team for a quotation.
Sauna cabins are delivered on a palletised shipping service to the curbside of your property. We recommend two people are available to offload the pallet which usually takes around 20 minutes. Gloves and safety goggle are recommended especially when handling glass.
Once your cabin has been manufactured (usually 2-3 weeks) it will be palletised and despatched, you will receive a call from the carrier 2 days in advance of delivery to arrange a suitable delivery date.
If your sauna is not immediately required please let us know as soon as possible, all sauna cabins are made to order.
For full details please refer to our Shipping Policy.
All Oceanic infrared sauna cabins have a 5 year warranty.
The warranty excludes heating elements as these are consumable items.
Our after sales service is at your disposal Monday - Thursday 9am - 5pm, & Friday 9am - 3pm, all parts are in stock and will be available during and beyond the warrant period.
What does this timber warranty cover?
The warranty covers any defects to timber materials used within the sauna under normal use. This includes the internal cladding, external cladding, benches, bench supports, backrests, floor mats.
What will Oceanic do to correct a problem?
In the rare event that a warranty claim is required Oceanic Saunas will provide a replacement for any confirmed broken piece of timber. This will not necessarily require the entire part to be replaced. I.e. An individual bench slat rather than the entire bench. Oceanic may offer a replacement but the customer may be required to return the product to Oceanic at the customers expense. The customer should follow the claims procedure as described below.
How long does the coverage last?
The timber warranty covers all the timber parts mentioned above for 5 years commencing the point of sale/purchase by the customer. No certificate is required and there is no need to activate the warranty, all records of the purchase are kept by Oceanic Saunas Ltd.
What does this warranty not cover?
- Use of domestic equipment in a commercial environment.
- Loss or Theft
- Damage resulting from negligence.
- Damage resulting from unauthorised modification.
- Damage caused by natural disaster.
- Consequential and indirect damage caused.
- On site installation, fitting or removal of items.
What do you have to do?
- To make a warranty claim, the customer is required to:
- Provide all information required by Oceanic to assess the issue.
- Oceanic may request detailed photographs.
- Oceanic will make a judgement based on this information as to what replacement parts may be needed or if items needs to be returned and replaced.
- Where a replacement is granted, the customer must first return the initial product to Oceanic or may be required to be sent to the product manufacturer, this will be confirmed by Oceanic during the claims procedure. The return shall be at the expense of the customer and should be sent via a recorded courier service. Oceanic holds no liability for items lost or damaged in transit.
- Download Files & Manuals